Heat Exchangers, Dryers & Pressure Vessels
Heat transfer and drying equipment to heat, cool, recover energy and turn liquids into powder.
From these four inputs our team can choose the exchanger or dryer type and a material that is safe for your fluid.
Energy savings start with the right heat transfer
Three manufacturers for heat transfer and drying. Choose by process:
Heating, cooling and heat recovery
Plate heat exchangers up to PN25, 304, 316L and titanium plates.
Not sure which solution fits? Read our heat exchanger and pressure vessel selection guide or consult your requirements with our engineering team.
Catalogues & Selection Guides
Key Questions on Technology & Machine Selection
When should I choose a plate heat exchanger over a tube type?
Plate heat exchangers are more compact and efficient for relatively clean fluids at medium pressure, for example up to PN25. Tube or finned tube types suit high temperatures, air-side heat transfer or fluids carrying particles. Read our plate vs tube heat exchanger comparison guide.
What materials are available for corrosive fluids?
Fiorini offers 304, 316L and titanium plates, with NBR, EPDM or Viton gaskets selected for the fluid and temperature.
What data should I prepare before a consultation?
Fluid on both sides, flow, inlet and outlet temperatures, working pressure, corrosiveness and the space available.
Size it from the heat duty and the fluid
Inlet and outlet temperatures, flow, pressure and corrosiveness decide the equipment type and its materials. We calculate the duty and choose a configuration that is efficient as well as easy to clean and maintain.
Brands in Heat Exchangers, Dryers & Pressure Vessels
Industrial equipment and process solutions with technical consultation and genuine spare parts availability.
Fiorini Industries
Plate Heat Exchangers & High-Efficiency Thermal Management Systems
Explore Brand →
Tecoma
Gatedryer drying plants for liquids and pumpable products
Explore Brand →
Valtecno
Finned tubes for industrial heat exchangers
Explore Brand →Map the requirement before narrowing the technology.
Thermal Duty & Working Fluids
- Process steam, thermal oil, chilled glycol, cooling water, compressed gas, or hot exhaust
- Thermodynamic parameters: thermal duty (kW/MW), logarithmic mean temperature difference (LMTD), and flow rate
- Permissible pressure drop limits across hot and cold circuit passes
Design Metallurgy & Pressure Codes
- Pressure vessel engineering codes: ASME Section VIII Div 1/2, PED 2014/68/EU compliance
- High-grade metallurgy: AISI 316L, Titanium, 254 SMO, Duplex, or copper-nickel alloys
- Resistance to thermal cycling, severe fouling, scaling, and chloride-induced corrosion
Energy Efficiency & Heat Recovery
- High-efficiency industrial convective or contact dryers for bulk granules and chemical crystals
- Waste heat recovery economizers cutting plant boiler fuel consumption
- Thermal buffer storage tanks for peak-shaving district and industrial process heating