Industrial Water, Waste & Recycling Treatment
Equipment for wastewater, sludge, exhaust air, plastic scrap and container washing, so plants meet regulations while cutting disposal costs.
From these four inputs our team can outline the treatment flow: screening, solids separation, dewatering or air treatment.
Turn waste from a cost into a controlled process
Six manufacturers for wastewater, sludge, exhaust air and recycling. Choose by waste type:
Wastewater and sludge
Filter presses, thickeners, automatic flocculant units, 3,000+ installations.
Screening and solids separation
0.25-6 mm screening, decanters with 41,500 machines installed.
Not sure which solution fits? Read our industrial filter press selection guide or consult your requirements with our engineering team.
Catalogues & Selection Guides
Key Questions on Technology & Machine Selection
When should I use a filter press instead of a decanter for sludge?
A filter press gives a drier cake and suits batch processes, while a decanter runs continuously and suits large volumes in limited space. The final choice depends on the sludge and the target dryness. See our filter press vs decanter guide for full comparative parameters.
Can you treat exhaust air and odour from the plant?
Yes. Ecochimica designs exhaust air treatment plants to suit each case, from vertical and horizontal scrubbers and Venturi quenchers to combustors and biofilters.
What data should I prepare before a consultation?
Waste type and daily volume, lab results if available, the discharge standard to meet, available space and photos of the current installation.
Start from the waste profile and discharge limits
Solids, oil, pH and odour decide the process sequence. We map waste sources and volumes, the discharge quality target and the available space, then build the combination of units with the lowest running cost.
Brands in Industrial Water, Waste & Recycling Treatment
Industrial equipment and process solutions with technical consultation and genuine spare parts availability.
Basca
Washing systems for IBCs, tanks and industrial containers
Explore Brand →
CMG
Plastic granulators for production scrap and recycling
Explore Brand →
Ecochimica
Industrial exhaust air treatment, from scrubbers to biofilters
Explore Brand →
Matec
Filter presses and industrial wastewater treatment plants
Explore Brand →
Pieralisi
Centrifugal decanters and separators since 1888
Explore Brand →
X2 Solutions
Equipment and systems for wastewater treatment
Explore Brand →Map the requirement before narrowing the technology.
Effluent Streams & Recyclable Materials
- Industrial process effluent, mineral quarry sludge, leachate, or contaminated exhaust air
- Rigid and flexible plastics, rubbers, organics, or solvent residues to be reclaimed
- Influent parameters: COD, BOD, TSS, turbidity, chemical species, and pH range
Throughput & Recovery Efficiency
- Processing flow rate (m³/h) and closed-loop water recovery percentage targets
- Filter press cake dryness percentage and centrifugal dewatering separation efficiency
- Size reduction granulator throughput, dust extraction, and regrind quality
Environmental Standards & Compliance
- What is the complete laboratory characterization of the effluent or scrap?
- What discharge standards or plant reuse benchmarks must be satisfied?
- How is dewatered cake or recycled granulate handled downstream?