CERTECHS

How to Calculate Kitchen Capacity for Restaurants, Hotels and Central Kitchens

HORECA4 min read
Short answer

Kitchen capacity is calculated from portions at the busiest hour, not the daily average. Set peak-hour portions, split them by menu item, then work out how many portions each piece of equipment can produce per hour. The unit with the smallest capacity against demand is the bottleneck to fix first.

Step 1: set peak-hour portions

Restaurants: seats multiplied by table turns at peak. For example, 80 seats with 1.5 turns in one hour means about 120 portions per hour.

Catering and central kitchens: portions that must be ready at dispatch, divided by the production time available.

Step 2: split by menu and cooking method

Group dishes by the equipment they use: oven, grill, range, fryer, boiling pan. This shows the load on each unit.

Step 3: calculate each unit capacity

Example: one 10-tray combi oven, 8 portions per tray, 20-minute cook, gives about 240 portions per hour. If oven dishes need 300 portions per hour, this oven is the bottleneck.

For soups, sauces and rice in volume, capacity is worked out in litres per cycle, for example 40-500 L boiling pans.

Step 4: check workflow and utilities

  • Flow: receiving, storage, prep, cooking, plating, washing
  • Power, gas, water and ventilation with all units running together
  • Room for menu growth or longer hours

Example equipment for high-volume kitchens

  • 3-20 tray combi ovens with 1000 recipes: PI.DOM
  • 40-500 L boiling and bratt pans: ICOS
  • Blast chillers down to -40 °C for cook-ahead production: TECNODOM

Frequently asked questions

Why not use the daily average?

Because kitchens jam at peak time. An average of 200 portions a day can mean 80 portions in two hours, and capacity must meet that.

How much spare capacity is ideal?

Usually some headroom is kept for menu growth and busy days. The exact figure depends on your business plan.

Can Certechs help with the calculation?

Yes. Send your concept, menu, peak-hour portions and kitchen layout, and our team will calculate and recommend equipment.

Need Technical Equipment Consultation?

Discuss operational requirements, flow rates, capacities, and site layout directly with Certechs engineering specialists.

Schedule a DemoProduct Inquiry